Place instrument into a suitable disinfectant with active cleaning properties so that all surfaces, inner cavities, lumens and openings come into contact with the solution. Follow the disinfectant manufacturer's instructions.
After chemical disinfection, always rinse thoroughly with clear, flowing water. Follow the instructions provided by the manufacturer of disinfectant.
Remove any dirt still clinging to the instrument with a soft synthetic brush. Do not use a scouring or metal brush.
Clean any lumens and conduits with soft, round, synthetic brushes. Please note, the lumen and the brush must have the same diameter.
Final rinsing to be done with distilled or deionized water.
Dry instrument with an absorbent, soft and lint-free cloth.
